Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
marca: MUYUAN
Pacote: Caixas de madeira compensada
produtividade: 8000 sets
transporte: Ocean,Land,Air
Lugar de origem: China
Apoio sobre: 8000 sets
Certificados : ISO9001
Código HS: 8413910000
porta: Xinggang,Xinggang,Xinggang
Tipo de pagamento: L/C,T/T,D/P,Paypal,Money Gram,Western Union
Incoterm: FOB,CFR,CIF,EXW,FCA,CPT,CIP
Peças sobressalentes da bomba de lama resistente ao desgaste de alto cromo
Introdução às peças da bomba de polpa:
O ferro fundido com alto teor de cromo é uma série de ferro fundido com cromo resistente ao desgaste com teor de cromo acima de 12% em peso, que atualmente é o material mais resistente ao desgaste. Portanto, o ferro fundido com alto teor de cromo apresenta alta resistência ao desgaste ao entregar lama contendo partículas sólidas duras. O representante do ferro fundido com alto teor de cromo é a liga M05 e M07; Enquanto isso, para aplicações específicas, eles derivam a liga M49 e M33 com excelente resistência à corrosão e a liga M12 e M61 com maior resistência ao desgaste, etc.
As peças da bomba de ferro fundido de alto cromo incluem as peças da extremidade úmida, como o revestimento volutte, impulsor e gargalo etc. Exceto o alto cromo, também podemos oferecer as peças da bomba de ployuratano, peças da bomba de borracha, peças da bomba de cerâmica e peças da bomba de aço inoxidável etc.
Inscrição:
As propriedades do material das peças da bomba com alto teor de cromo são feitas por um meio-termo judicioso entre três aspectos: dureza, tenacidade e resistência à corrosão, Seleção de material para aplicações específicas, exceto os três aspectos acima, devemos levar em consideração a condição de operação.
O processo de produção de alto cromo:
H Tabela aterial:
Material |
Material Code |
Description |
Hardnes (HRC) |
Impact Toughness (J/cm2) |
Standards |
High Chrome |
M05 |
M05 is a special alloy material, which especially is suitable for conditions with high impact load and good corrosion resistance. It is used in working condition when pH range is 5~12 |
≥58 |
5~7 |
ASTM A532 CL III-A |
M07 |
Compared with M05, it has a slightly lower abrasiveness and good anti-impact performance, and it is more suitable for lowe abrasive conditions. It is used in working condition when pH range is 5~12 |
≥58 |
5~7 |
ASTM A532 CL III-A |
|
M12 |
It has higher wear resistance than M05, but it is not resistant to corrosion. It is used in working conditions where the PH value is 6~14 and M05 is not suitable. |
60~67 |
2~5 |
|
|
M49 |
It has certain anti-impact and good corrosion resistance. It is used in the weak acid environment with pH range 4-6, especially suitable for flue gas desulfurization equipment in thermal power plants. |
35~45 |
5~7 |
|
|
M33 |
It has certain anti-impact and corrosion resistance and is used for oxidizing slurry with pH =1,such as conveying phosphogypsum and medium such as nitric acid, sulfuric acid and phosphoric acid. |
30-40 |
5~7 |
|
|
M61 |
M61 has better toughness than M12, and its matrix can be further harden by heat treatment, which can improove the anti-abrasion performance. |
60-67 |
5~6 |
|
Grupo de Produto : Peças de reposição da bomba > Peças de bomba cromada alta
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.